A maximum flow rate of 9,500 litres per hour makes the SP 9.500 Submersible Dirty Water Pump the perfect entry-level model for quickly pumping out and transferring water from water butts and garden ponds. It reliably pumps out clean and dirty water containing particles up to 20mm in diameter. For more substantial dirt, an optional prefilter can be fitted – which protects the pump impeller against blockages caused by larger obstacles like branches. The slide ring sealing – a tried-and-tested solution from the Karcher Professional range, also helps to ensure that the pump has an extraordinarily long lifetime. The warranty can be extended to five years if registered with Karcher. The SP 9.500 is fitted with a float switch that switches the pump on and off depending on the water level, thereby preventing dry running. Thanks to the fixing attachment for the float switch, the pump can be used even at a low water level down to a residual water depth of 25mm. Features & Benefits • Suitable for dirty water sources with particles up to 20mm in size • Float switch to prevent dry running Specifications • Pump Type: Submersible • Voltage: 240v (UK Mains) • Max Motor Rating: 280 Watts • Max Flow Rate: 9500 l/h • Max Delivery Temperature: 35°C • Delivery Head: 6 m • Max Pressure: 0.6 bar • Max Particle Size: 20mm • Max Immersion Depth: 7 m • Minimum Residual Water Depth: 25mm • Connecting Thread: G1 1/2 • Power Cable Length: 10 m Contents • SP 9.500 Submersible Dirty Water Pump • G1 Threaded Connector • Pump Connector G 1 ½ (1″, 1 ¼” and 1 ½” hose connection and G 1 ½ – thread) • Pipe Union (G 1 ½ – thread)