Equipped with a level sensor and integrated prefilter, the SP 22. 000 Sensor can pump out dirty water at a rate of up to 22,000 litres per hour. An individually adjustable level sensor starts the SP 22.000 Sensor immediately upon contact with water. If the water level drops below the level sensor again, the pump stops automatically after 15 seconds. The extremely powerful submersible pump is ideal for draining, for example, large garden ponds, flooded basements or construction pits, as it can reliably pump out dirty water (dirt particles of up to 30 mm) at a rate of up to 22,000 litres per hour. Features & Benefits • Designed for dirty water • Reliable pumping of water with dirt particles up to 30mm in size • Auto/Manual switch • Robust stainless steel prefilter protects the pump and impeller • Ceramic face seal • Level sensor: continuous switching level definition • In auto mode the pump automatically switches with the water level • In manual mode, the pump runs continuously until the minimum quantity of residual water is reached Specifications • Voltage: 240v UK Mains • Max Motor Rating: 750 Watts • Power Cable Length: 10 m • Max Flow Rate: 22000 litres per hour • Max Delivery Temperature: 35°C • Delivery Head: 8 m • Max Pressure: 0.8 bar • Max Grain Size: 30mm • Max Immersion Depth: 7 m • After-Running Time: 15 s • Dimensions: 238mm x 293mm x 354mm • Minimum Residual Water, Manual: 35mm Contents • SP 22. 000 Sensor Submersible Dirty Water Pump 240v