Maximum-Precision Deep Holes – The Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision. Its extended length makes this long bit capable of drilling deeply. The bit’s exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. This precision-ground bit made of HSS (high-speed steel) enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with chisel edges. This bit is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics. It has a cylindrical shank system (shank equal to drill bit diameter) and is intended for use in drill stands and drill drivers The Long HSS Twist Drill Bit Ground is manufactured to DIN 340. The drill bit is Type N (flute angle) with a 135-degree tip of 135 and a diameter tolerance of h 8. Cylindrical shank compatible with three-jaw drill chucks. Features and Benefits: • Drilling Deep Holes with Maximum Precision • Long HSS Twist Drill Bit Ground is for drilling deep holes through metal with maximum precision • The extended length makes this long bit capable of drilling deeply Specifications: Diameter (D): 8,00mm Working length (L1): 109mm Total length (L2): 165mm