The C410 Standard for Wood and Paint has a great material removal rate when hand-sanding wood and paint. This all-round hand-sanding product ensures an even and consistent material removal due to its tough semi-friable aluminium oxide abrasive grit coating. Furthermore, its electrostatically open coated surface enables good dust extraction, preventing clogging for efficient sanding and clean surface results. It is intended for the general hand sanding of wood, wood-based materials and veneer as well as solid surfaces and is suitable for intermediate sanding for varnishes on surfaces and roundings. It is also ideal for keying and sanding down paint, varnish and fillers as well as keying and fine sanding out feathered edges, primer and filler. This sheet is coated with tough semi-friable aluminium oxide for consistent surface quality. It is electrostatically open coated, which enables consistent material removal. Furthermore, the grit is bonded with fully synthetic resin on C-backing paper for high flexibility and optimal sanding behaviour. The C410 Standard for Wood and Paint sanding role is tearable to any desired size and is suitable for hand-sanding blocks. 50 m • Great Removal Rate • C410 Standard for Wood and Paint for a great material removal rate when hand-sanding wood and paint • Semi-friable aluminium oxide abrasive grit ensures an even and consistent material removal • An electrostatically open-coated surface enables dust extraction, preventing clogging for efficient sanding • High-quality semi-friable aluminium oxide for consistent surface quality Specifications Roll width mm: 115 Roll length m: 50 Grit: 80 Materials: Wood Materials in Detail: Softwood Hard/solid wood